KA 323 Single Leg Column Rope Lanyard with Energy Absorber

KA 323 Shock-Absorbing Single-Leg Webbing Lanyard

The KA 323 Shock-Absorbing Single-Leg Webbing Lanyard is a single-leg lanyard designed for use as a connecting component within personal fall protection systems for work at height.

The product features a 45 mm polyester webbing, an integrated energy absorber and two connectors. Available length options are 1.20 m, 1.50 m, 1.80 m and 2.00 m, with a product weight of 693 g.

The KA 323 is specified with EN 354, EN 355 and EN 362 standards.

What Is the KA 323 Single-Leg Lanyard?

The KA 323 is a shock-absorbing single-leg lanyard with a polyester webbing construction.

Its main components include:

• 45 mm polyester webbing
• Energy absorber
• 2 connectors
• Single-leg lanyard configuration
• 1.20 m, 1.50 m, 1.80 m and 2.00 m length options

The two connectors are connection components of the lanyard. Having two connectors does not make the KA 323 a twin-leg or double-leg lanyard.

The product itself is identified as a single-leg lanyard.

KA 323 Technical Construction

The KA 323 combines polyester webbing with an integrated energy absorber and two connectors.

The 45 mm polyester webbing forms the main connecting section of the lanyard, while the energy absorber is an important component of the fall protection system.

The connectors are used to establish the required connections within the compatible personal fall protection system.

The suitability of the complete system depends not only on the lanyard but also on the harness, anchor point, connection configuration, working environment and manufacturer's instructions.

What Is a Shock-Absorbing Lanyard Used For?

A shock-absorbing lanyard is used as a connecting component in personal fall protection systems.

The energy absorber is designed as part of the system to address the energy generated during a fall. EN 355 covers energy absorbers, while EN 354 covers lanyards and EN 362 covers connectors.

The KA 323 should therefore be evaluated as part of a complete fall protection system rather than as an isolated piece of equipment.

The selection and use of the lanyard should take into account the appropriate harness connection point, anchor point, working conditions, required clearance and manufacturer's instructions.

Which Standards Apply to the KA 323?

The KA 323 is specified with EN 354, EN 355 and EN 362.

EN 354 – Lanyards

EN 354 covers lanyards used as components of personal fall protection equipment.

The single-leg lanyard configuration of the KA 323 is associated with this standard.

EN 355 – Energy Absorbers

EN 355 covers energy absorbers used in personal fall protection equipment.

The integrated shock absorber of the KA 323 is the component associated with this standard.

EN 362 – Connectors

EN 362 covers connectors used in personal fall protection equipment.

The two connectors supplied with the KA 323 are the connection components of the product.

Is the KA 323 a Single-Leg Lanyard?

Yes.

The KA 323 is identified as a single-leg lanyard.

The presence of two connectors does not mean that the product has two lanyard legs.

The distinction is important:

Number of connectors ≠ Number of lanyard legs

The KA 323 has two connectors but remains a single-leg lanyard.

Where Can the KA 323 Be Used?

The KA 323 can be considered for use as a connecting component in personal fall protection systems for work at height.

Depending on the application, it may be considered for:

• Industrial maintenance
• Construction and installation work
• Steel structure work
• Platform work
• Maintenance and repair operations

The suitability of the product for a particular application must be assessed according to the working environment, anchor point, harness, fall protection system and manufacturer's instructions.

What Should Be Considered When Selecting the KA 323?

When selecting the KA 323, the following factors should be considered:

1. Working environment: Assess the conditions where the lanyard will be used.
2. Anchor point: Check compatibility with the intended anchor or connection point.
3. Harness: Use a suitable connection point on the compatible harness.
4. Length: Select the appropriate length according to the working conditions.
5. Connectors: Check connector compatibility with the intended connection points.
6. Fall clearance: Assess the required clearance for the complete fall protection system.
7. Pre-use inspection: Check the webbing, stitching, energy absorber and connectors before use.

Single-Leg vs Twin-Leg Lanyards

Single-leg and twin-leg lanyards have different configurations.

A single-leg lanyard has one connecting leg. The KA 323 belongs to this category.

A twin-leg lanyard, also commonly referred to as a Y-type lanyard, has two separate connecting legs.

Therefore, the KA 323 should not be classified as a twin-leg lanyard simply because it has two connectors.

KA 323 Technical Specifications

Frequently Asked Questions

What is the KA 323?

The KA 323 is a shock-absorbing single-leg webbing lanyard featuring 45 mm polyester webbing, an energy absorber and two connectors.

Is the KA 323 a single-leg lanyard?

Yes. The KA 323 is a single-leg lanyard. Its two connectors do not mean that it has two lanyard legs.

Which standards apply to the KA 323?

The KA 323 is specified with EN 354, EN 355 and EN 362.

How many connectors does the KA 323 have?

The KA 323 has two connectors.

What is the webbing width of the KA 323?

The KA 323 uses 45 mm polyester webbing.

What length options are available for the KA 323?

The available length options are 1.20 m, 1.50 m, 1.80 m and 2.00 m.

How much does the KA 323 weigh?

The product weight specified on the product page is 693 g.

Where can the KA 323 be used?

The KA 323 can be considered for use as a connecting component within personal fall protection systems for work at height. Its suitability depends on the complete system and working conditions.

What is the difference between the KA 323 and a twin-leg lanyard?

The KA 323 has one lanyard leg, while a twin-leg lanyard has two separate connecting legs. The two connectors on the KA 323 do not make it a twin-leg lanyard.

Conclusion

The KA 323 Shock-Absorbing Single-Leg Webbing Lanyard is a single-leg lanyard featuring 45 mm polyester webbing, an integrated energy absorber and two connectors.

The product is available in 1.20 m, 1.50 m, 1.80 m and 2.00 m lengths and has a specified weight of 693 g.

The KA 323 is specified with EN 354, EN 355 and EN 362 standards.

When selecting and using the product, the complete fall protection system, compatible harness, anchor point, working conditions, required clearance and manufacturer's instructions should be evaluated together.