KB 804 Anchor Sling

KB 804 Anchor Sling

The KB 804 anchor sling is an anchorage connection component designed for use in suitable work-at-height systems. It features 50 mm wide polyester webbing and a D-ring connection design. The available webbing length options are 1 m, 1.50 m and 2 m. The product page lists EN 795 and EN 354 as the applicable standards.

Expert Editorial Note | ipmarketi.com

Selecting work-at-height equipment requires more than checking its physical specifications. Its intended function, the anchorage arrangement and compatibility with the complete protection system must also be considered. When evaluating the KB 804 anchor sling, check the required webbing length, the structure of the connection points and the instructions for all components used in the system.

Reviewing technical specifications alongside the relevant product documentation helps professional users make informed equipment selection decisions.

Key Product Features

50 mm Polyester Webbing

The KB 804 features 50 mm wide polyester webbing. The material and width are key characteristics for identifying the product and assessing its intended application.

D-Ring Connection Design

The product page specifies a D-ring connection design. The connection arrangement and any connecting components must be assessed against the relevant technical instructions before use.

Multiple Length Options

The available webbing lengths are 1 m, 1.50 m and 2 m. Select the appropriate length according to the working environment, planned anchorage arrangement and equipment instructions.

Applications

Anchor slings can be used to establish connections within suitably designed work-at-height systems. The suitability of the KB 804 for a particular application depends on the anchorage structure, system design, product instructions and applicable requirements.

Potential application environments, subject to technical verification, include:

• Industrial maintenance and work-at-height activities
• Steel structure assembly and installation
• Maintenance and repair operations
• Other professional applications requiring a suitable anchorage connection

These are general examples, not confirmation that the product is suitable for every environment or application. Verify suitability before use.

Suitable Users

The KB 804 anchor sling may be considered by trained professionals involved in setting up or using work-at-height systems, provided the product is suitable for the intended application. Selection must follow the relevant risk assessment and manufacturer instructions.

Technical Specifications

Compatible Equipment

The equipment used with an anchor sling must be selected according to the complete system design and the intended application. Depending on the system, the following components may need to be considered:

• Full-body safety harness: For the appropriate user connection in a personal fall-arrest system.
• Connectors and carabiners: Where their compatibility with the complete system has been verified.
• Energy-absorbing lanyard or self-retracting fall arrester: Where appropriate for the system design and manufacturer instructions.
• Anchorage system: The structural anchorage and connection arrangement must be suitable for the intended application.

This list does not confirm automatic compatibility between the KB 804 and every listed component. Each component and the complete system must be assessed for suitability.

Usage and Inspection Guide

• Before each use, inspect the polyester webbing for cuts, tears, abrasion, damaged stitching and signs of chemical deterioration.
• Inspect the D-ring for deformation, cracks, corrosion or other damage that could affect its function.
• Check the product identification, instructions and available conformity documentation.
• Verify that the anchorage point and all connecting components are suitable for the planned system.
• Do not use equipment that is damaged, has an unknown history or is suspected of being unsuitable. Remove it from service according to the applicable procedures.
• Follow the manufacturer's instructions and applicable workplace safety requirements for installation, use, inspection and maintenance.

An anchor sling should not be treated as a complete fall-arrest system on its own. The required system components must be determined according to the risk assessment, working arrangement and manufacturer instructions.

Relevant Standards

EN 795

EN 795 addresses requirements for anchorage devices used in personal fall-protection systems. This standard is listed on the KB 804 product page. The specific class or type covered by the product's conformity documentation cannot be determined from the available page alone.

EN 354

EN 354 addresses lanyards used in personal fall-protection systems. This standard is also listed on the KB 804 product page. The product's intended mode of use should be confirmed using the relevant technical documentation.

Important: The presence of a standard number on a product page does not, by itself, establish a specific certification scope or suitability for every application. Relevant conformity documentation should be checked separately.

Product Advantages

• The 50 mm polyester webbing provides clearly identified material and width specifications.
• The D-ring connection design can be considered when evaluating a suitable connection arrangement.
• The 1 m, 1.50 m and 2 m length options support selection according to different connection requirements.
• The product code and listed standards help identify the product during technical evaluation.

Related Products and Categories

Anchorage equipment should be evaluated as part of the complete work-at-height system. Once the relevant category URLs have been verified, users may also review:

• ipmarketi.com – Work Safety Equipment
• Safety harnesses
• Anchorage equipment
• Lanyards and connecting equipment
• Self-retracting fall arresters

The category names above identify related product groups. Direct category links have not been added because their URLs have not been independently verified.

Frequently Asked Questions

1. What is the KB 804 anchor sling used for?

It is a polyester-webbing connection component with a D-ring design, intended to establish a suitable anchorage connection within a work-at-height system. Its application depends on the system design and product instructions.

2. What material is used in the KB 804?

The product page specifies 50 mm wide polyester webbing. The material of the D-ring is not stated.

3. Which lengths are available?

The product page lists lengths of 1 m, 1.50 m and 2 m.

4. What is the weight of the KB 804?

The listed weight is 417 g. The product page does not clarify whether this weight applies to every length option.

5. Which standards are listed for the KB 804?

The product page lists EN 795 and EN 354. Refer to the relevant technical documentation to confirm the specific conformity scope.

6. Can the KB 804 be used as a complete fall-arrest system on its own?

An anchor sling is not equivalent to a complete personal fall-arrest system. The required components and connection arrangement must be determined through a risk assessment and in accordance with the manufacturer's instructions.

7. What should be checked before purchasing the KB 804?

Check the required webbing length, connection arrangement, anchorage suitability, compatibility with the other system components and available technical documentation.

8. Can a damaged anchor sling still be used?

Equipment that is damaged or suspected of being unsafe must not be used. Remove it from service according to the applicable instructions and workplace procedures.

Why ipmarketi.com?

ipmarketi.com provides product information for professionals evaluating work safety and work-at-height equipment. Reviewing technical specifications, intended applications and relevant conformity documentation together is an important part of making an informed equipment selection.

Conclusion

The KB 804 anchor sling is specified with 50 mm polyester webbing, a D-ring connection design and length options of 1 m, 1.50 m and 2 m. EN 795 and EN 354 are listed on the product page. Before selecting the product, review the intended working conditions, connection arrangement and relevant technical documentation.