KI 288 Single-Leg Lanyard with Carabiner and Large Hook

KI 288 Static Work Positioning Lanyard with Karabiner and Large Hook

The KI 288 is a static work positioning lanyard designed for work positioning, securing and controlled positioning during work at height.

It features a screw-lock karabiner at one end and a large scaffold hook at the other end. This hybrid connection configuration allows the lanyard to be connected between a suitable positioning attachment point on a safety harness and an appropriate structural connection point.

The lanyard is manufactured with a 12 mm polyester static rope and is available in several specified lengths.

Important: KI 288 is a work positioning lanyard, not a shock-absorbing fall-arrest lanyard. Where a fall hazard exists, an appropriate fall-arrest system must be assessed and used separately as required by the application.

Hybrid Karabiner and Large Hook Configuration

KI 288 combines two different connection ends:

• 1 screw-lock karabiner
• 1 large scaffold hook

This configuration is intended for applications where the user needs a positioning connection between a suitable harness attachment point and a compatible structural element.

The large hook can be used with suitable scaffold tubes, steel beams and comparable structural elements where the connection is appropriate for the application.

Static Rope Construction

KI 288 uses a 12 mm polyester static rope. The product information describes the rope as a high-strength, low-stretch static rope.

Its static construction is relevant to the product's intended positioning function. It should not, however, be interpreted as an energy-absorbing feature.

Intended Use

The main intended uses of KI 288 include:

• Work positioning
• Positioning and securing
• Maintaining a controlled working position
• Connection to suitable structural points
• Positioning applications in scaffold and steel construction work

The product may be considered for suitable applications in steel construction, scaffold work, maintenance and repair activities, and positioning after reaching an appropriate connection point.

Applicable Standards

EN 354

EN 354 covers requirements applicable to lanyards. KI 288 is listed with EN 354 on the product source pages.

EN 362

EN 362 covers requirements applicable to connectors used in personal protective equipment against falls from height. KI 288 is listed with EN 362 together with its karabiner and hook connection components.

Important: EN 358 is not listed on the KI 288 product source pages. Therefore, an EN 358 compliance claim should not be added unless separately verified from the manufacturer's documentation.

Applications

Steel Construction

KI 288 can be considered for suitable positioning applications during assembly, maintenance and related work on structural steel components.

Scaffold Work

The large scaffold hook provides a connection option for suitable scaffold tubes and structural elements.

Maintenance and Repair

The product can be used for work positioning where an appropriate structural connection point is available.

Positioning After Vertical Access

KI 288 can be used to establish a working position after the user has reached a suitable connection point, subject to the application's requirements.

What to Consider When Choosing KI 288

Before selecting KI 288, confirm that:

• the intended application is work positioning;
• the safety harness has a suitable positioning attachment point;
• the structural connection point is appropriate for the intended use;
• the selected lanyard length matches the work situation;
• the karabiner and hook are compatible with their intended connection points;
• unnecessary slack is avoided during positioning;
• a separate fall-arrest system is provided where a fall hazard exists.

Technical Specifications

Technical Editor's Note

KI 288 should be classified primarily as a static work positioning lanyard / belt positioning rope, rather than a fall-arrest lanyard.

Its hybrid end configuration combines a screw-lock karabiner with a large scaffold hook, providing different connection options for suitable work positioning applications.

Product selection should consider the harness attachment point, the structural connection point, the required length and the fall hazards present in the working environment.

Pre-Use Checks

Before use, inspect:

• the rope for cuts or visible wear;
• the connection ends for deformation;
• the screw-lock karabiner locking mechanism;
• the large hook gate and locking condition;
• the correct connection of both ends.

Conclusion

KI 288 is a static work positioning lanyard made with a 12 mm polyester static rope and equipped with one screw-lock karabiner and one large scaffold hook.

It is available in 1.20 m, 1.50 m, 1.80 m and 2.00 m lengths, with EN 354 and EN 362 listed on the product source pages.

Its intended function is work positioning and securing. It should not be presented as a shock-absorbing fall-arrest lanyard.

 

What is the KI 288?

KI 288 is a static work positioning lanyard designed for work positioning, securing and controlled positioning during work at height.

What is the KI 288 used for?

It is used to establish and maintain a suitable working position by connecting the lanyard between appropriate attachment and structural connection points.

Is KI 288 a fall-arrest lanyard?

No. KI 288 is a static work positioning lanyard. It is not described as a shock-absorbing fall-arrest lanyard. Where a fall hazard exists, a suitable fall-arrest system should be assessed separately.

Which standards are listed for KI 288?

The product source pages list EN 354 and EN 362.

What is KI 288 made of?

KI 288 consists of a 12 mm polyester static rope, a large hook and a karabiner.

What lengths are available?

The product information lists 1.20 m, 1.50 m, 1.80 m and 2.00 m lengths.

How much does KI 288 weigh?

The specified product weight is 863 g.

Where can KI 288 be used?

It can be considered for suitable work positioning applications in steel construction, scaffold work, maintenance and repair, and positioning after reaching an appropriate connection point.

What connection ends does KI 288 have?

KI 288 has one screw-lock karabiner and one large scaffold hook.

How should KI 288 be selected?

Selection should consider the intended work positioning application, the harness attachment point, the structural connection point, the required length and the fall hazards present in the work area.

Does KI 288 comply with EN 358?

EN 358 is not listed on the KI 288 product source pages reviewed for this content. Therefore, EN 358 compliance should not be claimed without separate manufacturer documentation.